SWF/TB Series

port-9-1

  1. 1
    Specifitaion
    Speed : STANDARD(6 heads or more): 1,200 rpm [less than 8,400 mm(Length)] 1,100 rpm [8,400 mm
    (Length) or more and less than 10,000 mm(Length)] 1,000 rpm [10,000 mm(Length) or more] STANDARD
    (less than 6 heads) : 1,000 rpm Taping Head : 1,000 rpm [Taping & Zigzag] 500 rpm [Coiling]
    Stitching Length : 0.1 ~ 12.7 mm
    Motor / Main : Servo Motor x 1
    Motor / X-Y : [6heads≤:Servo; 6heads>:Step] Motor x 2
    Electricity / 1-Phase : 200V, 220V, 240V [50/60Hz]
    Electricity / 3-Phase : 200V, 220V, 240V, 350V, 380V, 415V(6heads or more) [50/60Hz]
    Power Consumption : 1.5 kW
    Bobbin Winder : Standard
    Upper Thread Holding Unit : Standard
    Lubrication System : Auto Lubrication System
    Operation Box : Color LCD Screen
    Hook : Standard Hook, Option : Large Hook
    Memory / Capacity : Standard : 4,000,000 stitches
    Memory / Media : USB Memory Stick
    Safety Device : Standard: Emergency Stop, Error Code Message
  2. 2
    Division of Model

     

    Model Head
    Interval
    [mm]
    Color Standard Head Y-
    Stroke
    [mm]
    Alternative Emb.Space[mm] / Each Head Emb.Space[mm] / All Head Machine Size[mm] / Length Machine Size[mm] / Width Machine Size[mm] / Height
    TB-WJ614-100 450 6 + 1 14 + 14 1 Non-alternative 450 x 1,000 6,750 x 1,000 8,468.5 2,498.5 1,827
    TB-WJ614-120 450 6 + 1 14 + 14 1,2 Non-alternative 450 x 1,200 6,750 x 1,200 8,468.5 2,848.5 1,827
    TB-WL906-120 550 9 + 1 6 + 6 1,2 Non-alternative 550 x 1,200 3,300 x 1,200 5,65 2,848.5 1,827
    TB-WL908-75 550 9 + 1 8 + 8 750 Non-alternative 550 x 750 4,400 x 750 6,75 1,95 1,727
    TB-WL910-120 550 9 + 1 10 + 10 1,2 Non-alternative 550 x 1,200 5,500 x 1,200 7,85 2,848.5 1,727
    TB-WL912-100 550 9 + 1 12 + 12 1 Non-alternative 550 x 1,000 6,600 x 1,000 8,95 2,498.5 1,827
    TB-WL912-120 550 9 + 1 12 + 12 1,2 Non-alternative 550 x 1,200 6,600 x 1,200 8,95 2,848.5 1,827
    TB-WL912-75 550 9 + 1 12 + 12 750 Non-alternative 550 x 750 6,600 x 750 8,95 1,958.5 1,827
    TB-WL915-100 550 9 + 1 15 + 15 1 Non-alternative 550 x 1,000 8,250 x 1,000 10,65 2,509 1,827
    TB-WL915-120 550 9 + 1 15 + 15 1,2 Non-alternative 550 x 1,200 8,250 x 1,200 10,65 2,848.5 1,827
    TB-WN902-100 660 9 + 1 2 + 2 1 Non-alternative 660 x 1,000 1,320 x 1,000 4,105 1,175 1,727
    TB-WN904-100 660 9 + 1 4 + 4 1 Non-alternative 660 x 1,000 2,640 x 1,000 5,1 1,175 1,727
    TB-WN904-75 660 9 + 1 4 + 4 750 Non-alternative 660 x 750 2,640 x 750 5,1 1,95 1,727
    TB-WN906-120 660 9 + 1 6 + 6 1,2 Non-alternative 660 x 1,200 3,960 x 1,200 6,51 1,935 1,727

     

  3. 3
    Feature

     

    AUTOMATIC SELECTION OF EMBROIDERY MODE

    This function enables taping(coding), coiling, zigzag swing embroidery and general embroidery to be randomly combined in O/P. Also, automatic conversion into the coiling(taping) head or the general head is possible according to operation of embroidery mode in the coiling(taping) head mix type embroidery machine.

    COMBINATION OF PERIPHERAL UNITS

    The peripheral units for taping(coding), coiling and zigzag swing embroidery can be easily replaced and mounted.

    AUTOMATIC GENERATION OF ZIGZAG SWING DATA

    As all zigzag swing patterns are automatically generated on the basis of running stitch data, data can be easily generated.

    CORRECT ATTACHMENT ROTATION

    As attachment rotation is always corrected and calibrated, correct control is possible.

    AUTOMATIC NIPPLE RETURN

    You can conveniently exchange the frame or the material as the nipple lifts up to the standby position at the end of embroidery.

    EXPANDED MEMORY SIZE

    The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.

    MIRROR IMAGE CONVERSION AND DESIGN DIRECTION

    You can turn the from 0˚ to 359˚ in the increments of 1˚ and also reverse the design in the X direction(mirror image).

    ENLARGING AND REDUCING DESIGN

    You can reduce or enlarge the embroidery design in size from 50% to 200% by 1% along the X and Y axis.

    AUTOMATIC SELECTION OF NEEDLE BAR

    You can select the order of the needle bars up to the 99th.

    GENERAL REPETITION WORK

    The same design can be repeated up to 99 times along the X and Y axis.

    SPECIAL REPETITION WORK

    Several designs can be repeated up to 63 times at different angles and directions.

    AUTOMATIC OFFSET

    The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and to switch the frames.

    MANUAL OFFSET

    You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work. The frame can be moved back to its original place by simply pressing the right buttons.

    ORIGIN RETURN

    The frame can be moved back to the start point of the design during the embroidery work.

    FLOAT STITCH FUNTION

    The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color without stitching.

    FRAME BACKWARD

    When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches.

    AUTOMATIC TRIMMING

    The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and quality of the finished product.

    EDIT FUNTION

    You can delete, change, or insert stitch data and function cades (jump, finish, trimming).

    INDIVIDUAL HEAD OPERATION

    You can work on the specific head with a broken thread with the remaining heads left as they are.

    AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION
    When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps reduce the number of defects.

  4. 4
    Technology

     

    Operation at correct timing by simultaneous operation of all heads with geared motor driving.

    Noise minimization and stable and smooth operation at motor driving.

    The operation of the upper thread holder for each head may be selected.

    New structure of tension plate and adoption of thread way.

    Reduction of load given to the thread compared with existing tension plates.

    Stable thread flow and smooth thread way.

    Specially processed materials are used for significant parts including the head frame and needle bar.

    Excellent mechanical endurance by ultra-precision processing.

    Easy maintenance.

    Manual lubrication allowing users to lubricate the Arm and Bed whenever required.

    Junction Valve allowing lubrication of just a certain amount in the fixed number of places.

    Individual lubrication is allowed for the general head needle bar and the coiling needle bar.

    Productivity is improved by less decrease of speed even at high-speed jump embroidery.
    When a certain head is stopped, this device prevents the thread of the stopped head from removal from the needle.

    Presser foot driving system of entirely new structure.

    Convenient maintenance.

    New type of low noise device.

    Ac servo motor for X-Y driving.

    The light but strong frame secures the high quality of embroidery.

    Touch Screen.

    New design.

    USB Memory.

    Sound function added, file name supported.

    Rack type for convenient maintenance.
    Supply of stable input volt
  5. 5
    Optional Device

     

    • Individual Sequin (SQ41i)
      Individual Sequin (SQ41i)
    • Sequin (SQ30/31D)
      Sequin (SQ30/31D)
    • Cording Attachment
      Cording Attachment
    • Zigzag Cording (ZD20)
      Zigzag Cording (ZD20)
    • Boring Attachment
      Boring Attachment
    • Big Sequin (SQ31B)
      Big Sequin (SQ31B)