-
1Specifitaion
Speed : Max. : 1,000 rpm Stitching Length : 0.1 ~ 12.7 mm Motor / Main : Servo Motor x 1 Motor / X-Y : Pulse x 3 Electricity / 1-Phase : 200V, 220V, 240V [50/60Hz] Power Consumption : 2 Head : 700 W 4 Head, 6 Head, 8 Head : 1.0 kW Power Consumption : 1.5 kW Bobbin Winder : Standard Upper Thread Holding Unit : Standard Lubrication System : Semi-auto Lubrication System Operation Box : Color LCD Screen Hook : Standard Hook Memory / Capacity : Standard : 4,000,000 stitches Memory / Media : USB Memory stick Safety Device : Emergency Stop, Error Code Message -
2Division of Model
Model Head
Interval
[mm]Color Standard Head Y-
Stroke
[mm]Alternative Emb.Space[mm] / Normal Emb.Space[mm] / Tubular Emb.Space[mm] / Wide cap frame Emb.Space[mm] / Semi cap frame Machine Size[mm] / Length Machine Size[mm] / Width Machine Size[mm] / Height K-UH1204-45 400 12 4 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 2,44 1,2 1,61 K-UH1206-45 400 12 6 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 3,24 1,67 1,61 K-UH1208-45 400 12 8 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 4,186 1,72 1,61 K-UH1506-45 400 15 6 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 3,24 1,67 1,61 K-UH1508-45 400 15 8 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 4,186 1,72 1,61 K-UH904-45 400 9 4 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 2,44 1,2 1,61 K-UH906-45 400 9 6 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 3,24 1,2 1,61 K-UH908-45 400 9 8 450 Non-alternative 400 x 450 319 x 439 360 x 75 180 x 83 4,186 1,61 1,61 K-UK1202-45 500 12 2 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 1,94 1,67 1,61 K-UK1204-45 500 12 4 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 2,94 1,67 1,61 K-UK1206-45 500 12 6 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 3,986 1,72 1,61 K-UK1502-45 500 15 2 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 1,94 1,67 1,61 K-UK1504-45 500 15 4 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 2,94 1,67 1,61 K-UK1506-45 500 15 6 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 3,986 1,72 1,61 K-UK604-45 500 6 4 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 2,94 1,67 1,61 K-UK606-45 500 6 6 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 3,986 1,72 1,61 K-UK902-45 500 9 2 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 1,94 1,2 1,61 K-UK904-45 500 9 4 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 2,94 1,2 1,61 K-UK906-45 500 9 6 450 Non-alternative 500 x 450 419 x 439 360 x 75 180 x 83 3,986 1,72 1,61 [/vtftable]
-
3Feature
EXPANDED MEMORY SIZE
Up to 100 designs can be saved to the memory and the capacity includes two million needles.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
The design can be turned by 1˚ between 0˚ and 359˚. Supports mirror image conversion (X-axis conversion).
ENLARGING AND REDUCING DESIGN
Embroidery design can be increased/decreased by 1% to X or Y axis within the range from 50% to 200%.
GENERAL REPETITION WORK
Same design can be repeated up to 99 times (X, Y axis direction).
SPECIAL REPETITION WORK
Allows repeat work up to 63 times for various designs and can modify the angle and the mirror during the repeat work.
AUTOMATIC OFFSET
To make frame replacement convenient, frame is automatically moved to the offset position after a completion of work. Offset position can be configured from the “Parameter Setting Mode”
MANUAL OFFSET
Manual offset function allows users to manually move the frame to a certain position while embroidering. The function allows convenient applique and frame replacement during the embroidery process. Frame can be moved to its original position afterwards with simple key control.
ORIGIN RETURN
Allows frame to return to its start point during embroidery.
FLOAT STITCH FUNTION
Needle bar can be moved forward or backward in the units of 1, 100, 1000, 10000 needles and color cord without actual embroidery.
FRAME BACKWARD
Allows frame to move to the position where embroidery started from 1 to 10 times when the thread becomes cut or falls off from the frame.
AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION
In case of power outage, frame is automatically returned to the position where embroidery stopped. This function greatly reduces the risk of ruining embroidery from unexpected power outage.
EDIT FUNTION
Edit Function allows users to delete, modify, and/or insert stich data and function code such as jump, end, and trimming.
INDIVIDUAL HEAD OPERATION
Individual Head Control allows users to control each head individually and leave other heads in their original location.
AUTO RECOGNITION OF OTHER COMPANY’S DESIGN CODE
Design formats from other companies saved in USB memory, and floppy disk are automatically recognized and can be applied towards embroidery.
SETTING SPEED AND CURRENT SPEED ARE DISPLAYED AT RPM ON THE SCREEN
Allows input/output, deletion of design using USB memory stick.
-
4Technology
Guarantee of the various environment for embroidery operation by attaching SQ40i and ZD-10 devices 
Uniformity of thread tension and Extension of the adjustment range of thread tension by applying new type of Thread Guide 
Improved Key TypeBasic application of10.4″Graphic TFT LCDEasy use based on communication-style control Supports external FDD, USB storage device
Supports USB slave port for PC connection
Multi-language support
Application of Color Change Board for stable color change 
Rack-type control box with convenient A/SConvenient wire management and maintenance by applying CAN communicationProvides one board per module, convenient replacement Compact-size
Using Transformer for stable electric power supply 