SWF/E Single Series

port-18-2

  1. 1
    Specifitaion
    Speed : Max. : 1,200 rpm
    Stitching Length : 0.1 ~ 12.7
    Motor / Main : BLDC Motor x 1
    Motor / X-Y : Pulse Motor x 2
    Electricity / 1-Phase : Free Voltage[100 ~ 240V] [50/60Hz]
    Power Consumption : 0.5 kW
    Bobbin Winder : Standart
    Operation Box : Color LCD Screen
    Hook : Standard Hook
    Memory / Capacity : Standard : 4,000,000 stitches
    Memory / Media : USB Memory stick
    Safety Device : Emergency Stop, Error Code Message
  2. 2
    Division of Model

     

    Model Color Standard Head Alternative Emb.Space[mm] / Normal Emb.Space[mm] / Tubular Emb.Space[mm] / Wide cap frame Emb.Space[mm] / Semi cap frame Machine Size[mm] / Length Machine Size[mm] / Width Machine Size[mm] / Height
    SWF/E-T1201 12 1 Non-alternative 520 x 360 412 x 357 360 x 75 180 x 83 1,191 1,113 1,408
    SWF/E-T1501 15 1 Non-alternative 520 x 360 412 x 357 360 x 75 180 x 83 1,191 1,113 1,408
  3. 3
    Features

    EXPANDED MEMORY SIZE

    Large memory capacity of 2,000,000 stitches can store up to 100 designs.

    MIRROR IMAGE CONVERSION AND DESIGN DIRECTION

    Design can be rotated 0˚ to 359˚ degree by degree and Mirror-converted (X-direction reverse)

    ENLARGING AND REDUCING DESIGN

    You can reduce or enlarge embroidery design within the range of 50% to 200% percent by percent respectively in the X or Y-axis.

    GENERAL REPETITION WORK

    You can set the same design to repeat up to 99 times in the X or Y-axis.

    SPECIAL REPETITION WORK

    Flexibly continuous work of various design using Mirror image conversion and changing angles up to 63 designs.

    AUTOMATIC OFFSET

    The frame automatically returns to the Offset point when completing embroidery for more convenient frame change. Choosing Auto Offset from Parameter select mode can make it easier to perform Frame change work at the position you want.

    MANUAL OFFSET

    You can manually move the frame to the pre-set position for the better job of applique or Frame change while embroidering. The Frame can be returned to its original point by simply using key operation.

    ORIGIN RETURN

    You can return the Frame back to the design starting point during the embroidery work.

    FLOAT STITCH FUNTION

    Capable of Needle Bar moving back and forth by the unit of 1, 100, 1000, 10000 stitches by color code without stitching.

    FRAME BACKWARD

    In the event that the thread breaks or goes out of its course, you can move the Frame back to the design starting point.

    AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION

    Even at the time of power failure, you can move the Frame back to exactly the right point where power supply stopped. And this allows the defect of finished goods to be reduced.

    EDIT FUNTION

    You can delete, change, or insert the stitch data and function codes (jump, end, trim)

  4. 4
    Technology
    Embroidery size of max 412mm(X) X 357mm(Y) allows large tubular embroidery material to be embroidered.

    Installation of flat table (Border) easily attachable and detachable can make it possible to embroider max 520mm(X) X 360mm(Y) of wide flat plane.

    High wear resistant Ceramic Eyelet in every Thread Course prevents the thread way from being worn.
    Adoption of specially processed materials and ultra precision machining allows the major mechanism such as Implementation of semi-permanent precision of embroidery by adopting stepping motor and LM guide

    6.4 inch graphic LCD monitor

    USB Port for connection (FAT16)

    External FDD

    Key-type User Interface

    Add LAN Port for Network

    Add USB Slave Port for connection to PC

    High resolution display

    More convenient maintenance due to Rack-type configuration

    Support Free Voltage

    Compact Control Box

    Back Plane Board doesn’t require complex cable work.

    Small-Head Tubular Type
    (Cylindrical Frame mountable)