SWF/DM Tubular Series

EXPANDED MEMORY SIZE

Up to 100 designs can be saved to the memory and memory capacity is two million stitches.

MIRROR IMAGE CONVERSION AND DESIGN DIRECTION

Design angle can be modified by 1˚ for angles between 0˚ and 359˚, and mirror image can be converted (X-axis conversion).

ENLARGING AND REDUCING DESIGN

Embroidery design can be enlarged or reduced by increments of 1% within the range between 50% and 200% to the direction of X and Y-axis.

GENERAL REPETITION WORK

Same design can be repeated up to 99 times to the direction of X-axis and Y-axis.

SPECIAL REPETITION WORK

A number of designs can be repeated while modifying mirror image and angle. Special repeat work can be set up to 63.

AUTOMATIC OFFSET

Frame is automatically returned to the offset point when embroidery is finished to ease embroidery replacement process. Frame replacement can be done at a desired position by configuring automatic offset from parameter setting mode.

MANUAL OFFSET

Frame can be manually moved from a pre-set position for better applique and frame replacement during the embroidery. Frame can be returend to its original position by simple key control.

ORIGIN RETURN

Frame can be returned to its starting point during the embroidery.

FLOAT STITCH FUNTION

By the units of 1, 100, 1000, and 10000 needles and color code unit, needle bar can be moved forward and backward without actual embroidery.

FRAME BACKWARD

When a thread falls off or becomes cut, frame can be returned to the starting point 1 – 10 times.

AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION

Frame can be automatically returned to the exact last position before power shortage and this function greatly reduces defects in complete products.

EDIT FUNTION

Stitch data and function code (jump, exit, trim) can be deleted, modified, inserted.

INDIVIDUAL HEAD OPERATION

Head with the cut thread can be separately controlled from other heads.