|Speed :||Max. : 1,500 rpm|
|Stitching Length :||0.1 ~ 12.7 mm|
|Motor / Main :||Servo Motor x 2|
|Motor / X-Y :||Servo Motor x 4|
|Electricity / 1-Phase :||100V, 110V, 120V, 200V, 220V, 240V [50/60Hz]|
|Power Consumption :||2.7 kW|
|Bobbin Winder :||Standard|
|Operation Box :||Color LCD Screen|
|Hook :||Standard Hook|
|Memory / Capacity :||Standard : 4,000,000 stitches|
|Memory / Media :||USB Memory stick|
|Safety Device :||Emergency Stop, Error Code Message|
|Alternative||Emb.Space[mm] / Normal||Emb.Space[mm] / Tubular||Emb.Space[mm] / Wide cap frame||Emb.Space[mm] / Semi cap frame||Machine Size[mm] / Length||Machine Size[mm] / Width||Machine Size[mm] / Height|
|400||15||4||450||Non-alternative||400 x 450||319 x 439||360 x 75||180 x 83||3,786||1,324||1,7|
|DM-UH1506D-45||400||15||6||450||Non-alternative||400 x 450||319 x 439||360 x 75||180 x 83||4,586||1,324||1,7|
|DM-UH1508D-45||400||15||8||450||Non-alternative||400 x 450||319 x 439||360 x 75||180 x 83||5,266||1,324||1,7|
EXPANDED MEMORY SIZE
Up to 100 designs can be saved to the memory and memory capacity is two million stitches.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
Design angle can be modified by 1˚ for angles between 0˚ and 359˚, and mirror image can be converted (X-axis conversion).
ENLARGING AND REDUCING DESIGN
Embroidery design can be enlarged or reduced by increments of 1% within the range between 50% and 200% to the direction of X and Y-axis.
GENERAL REPETITION WORK
Same design can be repeated up to 99 times to the direction of X-axis and Y-axis.
SPECIAL REPETITION WORK
A number of designs can be repeated while modifying mirror image and angle. Special repeat work can be set up to 63.
Frame is automatically returned to the offset point when embroidery is finished to ease embroidery replacement process. Frame replacement can be done at a desired position by configuring automatic offset from parameter setting mode.
Frame can be manually moved from a pre-set position for better applique and frame replacement during the embroidery. Frame can be returend to its original position by simple key control.
Frame can be returned to its starting point during the embroidery.
FLOAT STITCH FUNCTION
By the units of 1, 100, 1000, and 10000 needles and color code unit, needle bar can be moved forward and backward without actual embroidery.
When a thread falls off or becomes cut, frame can be returned to the starting point 1 – 10 times.
AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION
Frame can be automatically returned to the exact last position before power shortage and this function greatly reduces defects in complete products.
Stitch data and function code (jump, exit, trim) can be deleted, modified, inserted.
INDIVIDUAL HEAD OPERATION
Head with the cut thread can be separately controlled from other heads.
|Damages made to cam are greatly reduced by applying steel cam follower to outer part of take-up lever|
|Internal X,Y-DriverImproved signal transferability following shortened cable length
Easy to check driver status
Installed internal Control Box that we espect enhanced work and A/S efficiency.
|Enhanced key-type operation boxLarge 10.4” Graphic TFT LCD monitor
Communication-type easy control for convenient work
Supports 2DD/2HD FDD, USB Memory Stick, LAN
Touch Screen (Option) Operation Box
Improved CPU Clock
Improved reliability with fan application