|Speed :||Max. : 1,000 rpm|
|Stitching Length :||0.1 ~ 12.7|
|Motor / Main :||Servo Motor x 1|
|Motor / X-Y :||Pulse Motor x 3|
|Electricity / 1-Phase :||Free Voltage[100 ~ 240V] [50/60Hz]|
|Power Consumption :||1.0 kW|
|Bobbin Winder :||Standart|
|Operation Box :||Key Type|
|Hook :||Standard Hook|
|Memory / Capacity :||Standard : 2,000,000 stitches / Optional : 4,000,000 stitches|
|Memory / Media :||2HD 3.5″ Floppy Disk|
|Safety Device :||Emergency Stop, Error Code Message|
|Model||Color Standard||Head||Alternative||Emb.Space[mm] / Each Head||Machine Size[mm] / Lenght||Machine Size[mm] / Widht||Machine Size[mm] / Height|
|SWF/D-W1201-100||12||1||Non-alternative||1,000 x 1,000||2,475||2,56||1,612|
EXPANDED MEMORY SIZE
The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
You can turn the from 0˚ to 359˚ in the increments of 1˚ and also reverse the design in the X direction(mirror image).
ENLARGING AND REDUCING DESIGN
You can reduce or enlarge the embroidery design in size from 50% to 200% by 1% along the X and Y axis.
AUTOMATIC SELECTION OF NEEDLE BAR
You can select the order of the needle bars up to the 99th.
GENERAL REPETITION WORK
The same design can be repeated up to 99 times along the X and Y axis.
SPECIAL REPETITION WORK
Several designs can be repeated up to 63 times at different angles and directions.
The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and to switch the frames.
You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work. The frame can be moved back to its original place by simply pressing the right buttons.
The frame can be moved back to the start point of the design during the embroidery work.
FLOAT STITCH FUNTION
The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color without stitching.
When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches.
The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and quality of the finished product.
AUTOMATIC UPPER/LOWER THREAD BREAKING SENSING
The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically stops the machine.
AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION.
When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps reduce the number of defects.
A 3.5″ floppy drive is embedded in the operation panel for you to read or store designs. Both 2DD and 2HD disks can be used.
You can delete, change, or insert stitch data and function cades (jump, finish, trimming).
The screen will indicate why the machine has stopped.
The screen indicates rpm.
SETTING OF FRAME MOVEMENT SPEED
You can adjust the frame speed to high, medium, or low.
The screen indicates the memory available for use.
TAPE CODE COMPATIBLITY
2-binary and 3-binary tape codes can be edited.
640*480 COLOR LCD MONITOR
You can install a 640 * 480 color LCD monitor onto your operation panel for easier reading of data.
AUTO RECOGNITION OF OTHER COMPANY’S DESIGN CODE
The machine can automatically read designs of various formats stored in the floppy disk.
|Format||1. SST||2. DST, DSB, DSZ||3. TAP||4. FMC, FDR|
|5. ZSK||6. TOYOTA(10O)||7. EXP|
|For Decreasing the resistance thread course on the 1,000spm speed, 3 arrangement type of Thread Tension unit was adopted and By using of ceramic eyelet on all thread course, it prevent from abrasion of thread course.|
|Frequently used functions are iconized for easy operation, and even novice can operate the machine without any difficulty by adoption dialogue-style input method for machine set-up and data input (Option).|
|We can see the general setting situation and input of embroidery data easily at a look through LCD by adopting both back-light attached LCD and VFD screen at the same time. Also the machine systems are designed to be met with operator’s convenience by checking processing situation and errors easily through VFD during the operation.|
|Powerful endurance was originated by materials with ultra precision processing in the main mechanism such as take-up needle bar, moving Mess&head. For the accurate & fast frame movement and head transfer, stepping motor of high-precision and LM guide system for FA are adopted, realizing semi-permanent precision for embroidery.|
|By controlling the wired under-thread volume on the Bobbin with Dial method, you can wire the two Bobbin at the same time therefore productivity is improved.|
|Sub control device with Ratchet type detect not only upper thread breaking but also under thread volume on the bobbin.|
|By controlling the main shaft drive with AC servo motor, the response for the speed change even stitching becomes fast and smooth so that stable and accurate embroidery can be made in every speed range.|