Speed : | Standard : 1,200 rpm[12 Heads or less]; 1,000 rpm[15 Heads] Chenille : 800 rpm |
Stitching Length : | 0.1 ~ 12.7 mm |
Motor / Main : | Servo Motor x 1 |
Motor / X-Y : | Servo Motor x 2 |
Electricity / 1-Phase : | 200V, 220V, 240V [50/60Hz] |
Electricity / 3-Phase : | 200V, 220V, 240V, 350V, 380V, 415V [50/60Hz] |
Power Consumption : | 3 kW |
Bobbin Winder : | Standard |
Upper Thread Holding Unit : | Standard |
Lubrication System : | Auto Lubrication System |
Operation Box : | Color LCD Screen |
Hook : | Standard Hook, Option : Large Hook |
Memory / Capacity : | Standard : 4,000,000 stitches |
Memory / Media : | USB Memory Stick |
Safety Device : | Standard: Emergency Stop, Error Code Message |
Model | Head Interval [mm] |
Color Standard | Color Chenille | Head | Y- Stroke [mm] |
Alternative | Emb.Space[mm] / Each Head | Emb.Space[mm] / All Head | Machine Size[mm] / Length | Machine Size[mm] / Width | Machine Size[mm] / Height |
CE-6015-120 | 480 | 0 | 6 | 15 | 1,2 | Non-alternative | 480 x 1,200 | 7,200 x 1,200 | 8,749 | 2,86 | 1,827 |
CE-6015-85 | 480 | 0 | 6 | 15 | 850 | Non-alternative | 480 x 850 | 7,200 x 850 | 8,749 | 2,159 | 1,827 |
CE-6902-75 | 480 | 9 | 6 | 2 | 750 | Non-alternative | 480 x 750 | 960 x 750 | 3,545 | 1,983 | 1,727 |
CE-6904-85 | 500 | 9 | 6 | 4 | 850 | Non-alternative | 500 x 850 | 2,000 x 850 | 4,025 | 2,179 | 1,827 |
CE-6906-120 | 480 | 9 | 6 | 6 | 1,2 | Non-alternative | 480 x 1,200 | 2,880 x 1,200 | 4,885 | 2,86 | 1,827 |
CE-6906-75 | 500 | 9 | 6 | 6 | 750 | Non-alternative | 500 x 750 | 3,000 x 750 | 5,013 | 1,98 | 1,827 |
CE-6912-75 | 500 | 9 | 6 | 12 | 750 | Non-alternative | 500 x 750 | 6,000 x 750 | 8,058 | 1,978.5 | 1,827 |
CE-6915-100 | 480 | 9 | 6 | 15 | 1 | Non-alternative | 480 x 1,000 | 7,200 x 1,000 | 9,205 | 2,518.5 | 1,827 |
CE-6915-120 | 480 | 9 | 6 | 15 | 1,2 | Non-alternative | 480 x 1,200 | 7,200 x 1,200 | 9,205 | 2,86 | 1,827 |
CE-6915-75 | 480 | 9 | 6 | 15 | 750 | Non-alternative | 480 x 750 | 7,200 x 750 | 9,205 | 1,98 | 1,827 |
CE-6915-85 | 480 | 9 | 6 | 15 | 850 | Non-alternative | 480 x 850 | 7,200 x 850 | 9,205 | 2,178 | 1,827 |
SELECTION OF EMBROADERY METHOD
Either Chain Stitch or Loop Stitch may be selected for embroidery.
NEEDLE BAR HEIGHT SETTING
The height of the needle bar may be changed by 0.3mm per step from Step 1 through Step 10.
CHENILLE EMBROIDERY TRIMMING
Either Chain Stitch or Loop Stitch can be selected for trimming.
EXPANDED MEMORY SIZE
The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
Design angle can be modified by 1˚ for angles between 0˚ and 359˚, and mirror image can be converted (X and Y-axis conversion).
ENLARGING AND REDUCING DESIGN
Embroidery design can be enlarged or reduced by increments of 1% within the range between 50% and 200% to the direction of X and Y-axis.
AUTOMATIC SELECTION OF NEEDLE BAR
You can select the order of the needle bars up to the 99th.
GENERAL REPETITION WORK
Same design can be repeated up to 99 times to the direction of X and Y-axis.
SPECIAL REPETITION WORK
A number of designs can be repeated while modifying mirror image and angle. Special repeat work can be set up to 63.
AUTOMATIC OFFSET
Frame is automatically returned to the offset point when embroidery is finished to ease embroidery replacement process. Frame replacement can be done at a desired position by configuring automatic offset from parameter setting mode.
MANUAL OFFSET
Frame can be manually moved from a pre-set position for better applique and frame replacement during the embroidery. Frame can be returend to its original position by simple key control.
ORIGIN RETURN
Frame can be returned to its starting point during the embroidery.
FLOAT STITCH FUNTION
By the units of 1, 100, 1000, and 10000 needles and color code unit, needle bar can be moved forward and backward without actual embroidery.
FRAME BACKWARD
When a thread falls off or becomes cut, frame can be returned to the starting point 1 – 10 times.
AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION
Frame can be automatically returned to the exact last position before power shortage and this function greatly reduces defects in complete products.
EDIT FUNTION
Stitch data and function code (jump, exit, trim) can be deleted, modified, inserted.
SETTING SPEED AND CURRENT SPEED ARE DISPLAYED AT RPM ON THE SCREEN
Allows input/output, deletion of design using USB memory stick.
INDIVIDUAL HEAD OPERATION
Head with the cut thread can be separately controlled from other heads.
![]() |
Formation of chain and loop stitch by precision control of the Looper of the Looper Base. |
---|---|
![]() |
Without controller contrary to existing arms Precision control of the needle bar with the Stepping Motor. |
![]() |
Productivity is improved by less decrease of speed even at high-speed jump embroidery. |
![]() |
When a certain head is stopped, this device prevents the thread of the stopped head from removal from the needle. Performance improvement. |
![]() |
New structure of tension plate and adoption of thread way. Reduction of load given to the thread compared with existing tension plates. Stable thread flow and smooth thread way. |
![]() |
Application of the wearproof ceramic eyelet to all thread courses. Supply of smooth thread and wearproofing of thread w |