|Speed :||Max. : 850 rpm|
|Stitching Length :||0.1 ~ 12.7 mm|
|Motor / Main :||Servo Motor x 1|
|Motor / X-Y :||Servo Motor x 2|
|Electricity / 1-Phase :||200V, 220V, 240V [50/60Hz]|
|Electricity / 3-Phase :||200V, 220V, 240V, 350V, 380V, 415V [50/60Hz]|
|Power Consumption :||1.5 kW|
|Bobbin Winder :||Standard|
|Operation Box :||Color LCD Screen|
|Hook :||Standard Hook|
|Memory / Capacity :||Standard : 4,000,000 stitches|
|Memory / Media :||USB Memory stick|
|Safety Device :||Emergency Stop, Error Code Message|
|Embroidering Range[X*Y] / General :||Head Internal x 680 mm|
|Embroidering Range[X*Y] / AFC :||Head Internal x 550 mm|
|Embroidering Range[X*Y] / Overlap :||60|
|Work Specification :||specification[thick and thin fabrics]|
|Maximum Roll size :||120 Inch x 2 Roll|
|MODEL||Head Interval [mm]||Color Standard||Head||Y-Stroke
|Alternative||Emb.Space[mm] / Each Head||Emb.Space[mm] / All Head||Machine Size[mm] / Length||Machine Size[mm] / Width||Machine Size[mm] / Height|
|240||6||30||680||Alternative||240 x 680||7,200 x 680||8,88||1,97||1,827|
|E-WS(X)330-68||135.4[270.8]||3||30||680||Alternative||135.4[270.8] x 680||4,062 x 680||5,668||1,97||1,727|
EXPANDED MEMORY SIZE
The machine can store a maximum of 100 designs. The basic memory size is 2 million stitches.
MIRROR IMAGE CONVERSION AND DESIGN DIRECTION
You can turn the from 0˚ to 359˚ in the increments of 1˚ and also reverse the design in the X direction(mirror image).
ENLARGING AND REDUCING DESIGN
You can reduce or enlarge the embroidery design in size from 50% to 200% by 1% along the X and Y axis.
AUTOMATIC SELECTION OF NEEDLE BAR
You can select the order of the needle bars up to the 99th.
GENERAL REPETITION WORK
The same design can be repeated up to 99 times along the X and Y axis.
SPECIAL REPETITION WORK
Several designs can be repeated up to 63 times at different angles and directions.
The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and to switch the frames.
You can manually move the frame to the pre-selected point to do appliques or change the frames during embroidery work. The frame can be moved back to its original place by simply pressing the right buttons.
The frame can be moved back to the start point of the design during the embroidery work.
FLOAT STITCH FUNTION
The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10000 stitches and by color without stitching.
When the thread breaks or runs out of track, you can move the needle bar back to the starting point of the design in the units of one to ten stitches.
The automatic trimming function, determined by the design and the machine set-up, enhances work productivity and quality of the finished product.
AUTOMATIC UPPER/LOWER THREAD BREAKING SENSING
The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically stops the machine.
AUTO RETURN TO THE EMBROIDERY STOP POSITION AFTER SUDDEN POWER INTERRUPTION
When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped. This helps reduce the number of defects.
A 3.5″ floppy drive is embedded in the operation panel for you to read or store designs. Both 2DD and 2HD disks can be used.
You can delete, change, or insert stitch data and function cades (jump, finish, trimming).
INDIVIDUAL HEAD OPERATION
You can work on the specific head with a broken thread.
The screen will indicate why the machine has stopped.
The screen indicates rpm.
SETTING OF FRAME MOVEMENT SPEED
You can adjust the frame speed to high, medium, or low.
The screen indicates the memory available for use
TAPE CODE COMPATIBLITY
2-binary and 3-binary tape codes can be edited
640*480 COLOR LCD MONITOR
You can install a 640 * 480 color LCD monitor onto your operation panel for easier reading of data.
AUTO RECOGNITION OF OTHER COMPANY’S DESIGN CODE
The machine can automatically read designs of various formats stored in the floppy disk.
|Format||1. SST||2. DST, DSB, DSZ||3. TAP||4. FMC, FDR|
|5. ZSK||6. TOYOTA(10O)||7. EXP|
|To use material of Varied width, Clamp is used.|
|Powerful Air cylinder perfectly hold from thin material to thick material.|
|Sub control device with Ratchet type detect not only upper thread breaking but also under thread volume on the bobbin.|
|By Start/Stop Switch installed on Back side of Embroidery Machine, material is provided smoothly.|
|By Stretching Structure, material can be stretched, and Accurate embroidery come true.|
|To embroider continually, Roll for wring material and Roll for providing material are installed.|
|We can see the general setting situation and input of embroidery data easily at a look through LCD on the Operation Box.|
|By controlling the wired under-thread volume on the Bobbin with Dial method, you can wire the two Bobbin at the same time therefore productivity is improved.|